RM EYE Electrical Asset Health Index and Condition Codes

Electrical Asset Health Index & Condition Codes

ADX diagnostic codes are built to catch exactly these silent failure modes, well before protection is the only thing standing between a developing fault and a forced outage.

Asset Health, Diagnosed Like a Patient.

ADX is RM EYE’s diagnostic coding framework for electrical assets, where every reading a technician takes becomes part of a structured, standardized, and auditable health record.

The Translation Problem

A transformer’s DGA reading and a breaker’s contact-wear reading don’t speak the same language, making fleet-wide risk ranking nearly impossible by hand.

One Scale, Built on Standards

Every score is grounded in the real diagnostic methods for that asset type, then normalized so a transformer, a breaker, and a cable can finally be compared side by side.

Asset health, now standardized.

ADX borrows the record architecture medicine uses to diagnose a patient: coded findings, a list of problems with one principal diagnosis, and applies it to asset condition assessment.

A Coded Problem List Per Asset

Diagnostic, Cause, Failure-at-risk, and Remedial codes, cross-referenced automatically in RM EYE

Recovery Class Tagging

On every recommended action (Restorative / Slowing / Surveillance / Replacement)

Diagnostic Thresholds

Referenced to named IEC/IEEE/CIGRE standards

A Risk Register View

That triages by risk, followed by trend and time-to-action.

One Health Language Across the Entire Fleet.

Turns raw readings per asset into a structured, standardized problem list

Flags the Principal finding that governs risk

Tags every recommended action with a Recovery Class to set expected improvement before the maintenance

Ties every diagnostic threshold to a named standard (IEC/IEEE/CIGRE) for findings to be defensible to auditors, insurers, and OEMs

See how your fleet's raw readings turn into a diagnosis.